The Complete Guide To Black & Decker 9072: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Black & Decker 9072 Information

The Black & Decker 9072 is a cordless screwdriver that is perfect for light-duty tasks around the home. It features a 2.4-volt NiCd battery that provides up to 15 minutes of run time, and a variable speed trigger that allows you to control the amount of torque. The screwdriver also has a 1/4-inch hex chuck that accepts most standard screwdriver bits.

Image of Black & Decker 9072 cordless screwdriver

Here are the full specifications of the Black & Decker 9072:

SpecificationValue
Voltage2.4 volts
BatteryNiCd
Run timeUp to 15 minutes
Torque5.5 in-lbs
Chuck size1/4-inch hex
Weight4.2 ounces

Features

  • Lightweight and compact design for easy handling
  • Variable speed trigger for precise control
  • 1/4-inch hex chuck accepts most standard screwdriver bits
  • Built-in LED light for working in dark areas
  • Durable construction for long-lasting use

What's in the box

  • Black & Decker 9072 cordless screwdriver
  • 2 NiCd batteries
  • Charger
  • Screwdriver bits
  • Instruction manual

The Black & Decker 9072 is a great choice for anyone who needs a cordless screwdriver for light-duty tasks around the home. It's easy to use, lightweight, and has a long battery life. If you're looking for a basic screwdriver that will get the job done, the Black & Decker 9072 is a great option.

Here are some additional pros and cons of the Black & Decker 9072:

Pros:

  • Lightweight and compact
  • Variable speed trigger
  • 1/4-inch hex chuck
  • Built-in LED light
  • Durable construction

Cons:

  • NiCd batteries can be less efficient than NiMH or lithium-ion batteries
  • No belt clip or carrying case

Overall, the Black & Decker 9072 is a great value for a cordless screwdriver. It's easy to use, lightweight, and has a long battery life. If you're looking for a basic screwdriver that will get the job done, the Black & Decker 9072 is a great option.

Black & Decker 9072 Compare with Similar Item

a table comparing the Black & Decker 9072 with two similar items:

FeatureBlack & Decker 9072DeWalt DWE6421KSMakita XFD07Z
Motor7.5 amps6.5 amps7.5 amps
Speed0-3,200 RPM0-3,000 RPM0-3,000 RPM
Plunge depth1-3/4"1-1/2"1-1/2"
Weight4.4 pounds5.1 pounds4.3 pounds
Price$100$110$120

Overall, the Black & Decker 9072 is a good value for the price. It has a powerful motor, a variable speed setting, and a deep plunge depth. However, it is not the lightest or most compact saw on the market.

The DeWalt DWE6421KS is a bit more expensive than the Black & Decker 9072, but it is also lighter and has a more compact design. It also has a laser guide, which can be helpful for making accurate cuts.

The Makita XFD07Z is the most expensive saw in this comparison, but it is also the most powerful. It has a brushless motor that delivers more torque and runs cooler than a traditional brushed motor. It also has a dust collection system that helps to keep your work area clean.

Ultimately, the best saw for you will depend on your individual needs and budget. If you are looking for a good value for the price, the Black & Decker 9072 is a great option. If you want a lighter and more compact saw with a laser guide, the DeWalt DWE6421KS is a good choice. And if you want the most powerful saw with a brushless motor, the Makita XFD07Z is the best option.

Black & Decker 9072 Pros/Cons and My Thought

The Black & Decker 9072 is a versatile handheld power tool that can be used for a variety of cleaning tasks. It features a 2-in-1 design with a motorized brush and a crevice tool, making it ideal for cleaning hard surfaces, grout, and crevices. The tool also has a variable speed control, so you can adjust the speed to the specific task at hand.

Pros:

  • Versatile 2-in-1 design
  • Motorized brush for hard surfaces
  • Crevice tool for tight spaces
  • Variable speed control
  • Lightweight and easy to use
  • Durable construction

Cons:

  • Small battery life
  • Not as powerful as some other cordless tools
  • Can be a bit noisy

User reviews:

  • Positive: "This is a great little tool for cleaning hard surfaces. The motorized brush makes it easy to get into grout and other tight spaces. The variable speed control is also a nice feature." - Amazon reviewer
  • Negative: "The battery life is a bit short, but it's not a deal-breaker. I just wish it was a bit more powerful." - Home Depot reviewer

My thoughts:

Overall, I think the Black & Decker 9072 is a great little tool for cleaning around the house. It's versatile, easy to use, and durable. The battery life could be better, but it's not a deal-breaker. I would definitely recommend this tool to anyone looking for a versatile and easy-to-use handheld power cleaner.

Here are some additional thoughts:

  • The Black & Decker 9072 is a good choice for people who want a versatile and easy-to-use handheld power cleaner.
  • It's not the most powerful tool on the market, but it's powerful enough for most cleaning tasks.
  • The battery life is a bit short, but it's not a deal-breaker.
  • I would recommend this tool to anyone looking for a good value for their money.

Black & Decker 9072 Where To Buy

some places where you can buy the Black & Decker 9072 and spare parts:

  • Direct: You can buy the Black & Decker 9072 directly from Black & Decker's website. They have a variety of spare parts available as well.
  • Walmart: Walmart is another good option for buying the Black & Decker 9072. They often have competitive prices, and they also have a good selection of spare parts.
  • Amazon: Amazon is a great place to buy just about anything, including the Black & Decker 9072. They have a wide selection of spare parts available as well, and their prices are often very competitive.
  • Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store that sells the Black & Decker 9072. They also have a good selection of spare parts available.
  • Lowes: Lowes is another good option for buying the Black & Decker 9072 in a brick-and-mortar store. They also have a good selection of spare parts available.
  • eBay: eBay is a great place to find deals on the Black & Decker 9072, as well as spare parts. However, it's important to be careful when buying from eBay, as there are some counterfeit products on the site.

I hope this helps!

Black & Decker 9072 Problems and Solutions

some common issues and solutions for the Black & Decker 9072:

Issue: The saw won't start. Solution: Check the power cord to make sure it's plugged in properly. If the saw is still not starting, check the fuse or circuit breaker. If the fuse or circuit breaker is blown, replace it.

Issue: The saw blade is not spinning. Solution: Check the switch to make sure it's turned on. If the switch is turned on, check the belt to make sure it's not slipping. If the belt is slipping, tighten it or replace it.

Issue: The saw is making a strange noise. Solution: Listen to the noise to try to determine where it's coming from. If the noise is coming from the motor, the motor may be worn out and need to be replaced. If the noise is coming from the blade, the blade may be dull and need to be sharpened.

Issue: The saw is not cutting straight. Solution: Check the blade to make sure it's aligned properly. If the blade is not aligned properly, align it using the instructions in the owner's manual.

Issue: The saw is smoking. Solution: Stop using the saw immediately and unplug it. Do not use the saw again until you have determined the cause of the smoking. The smoking may be caused by a problem with the motor or the blade.

Here are some additional tips for preventing problems with the Black & Decker 9072:

  • Keep the saw clean and free of debris.
  • Inspect the saw regularly for wear and tear.
  • Replace the blade as needed.
  • Store the saw in a cool, dry place.

I hope this helps!

Black & Decker 9072 Manual

Safety Information

  • Read and understand all instructions before using this tool.
  • Keep your work area clean and well lit.
  • Do not use this tool in explosive atmospheres.
  • Keep bystanders, children, and visitors away while operating this tool.
  • Wear safety glasses and hearing protection when using this tool.
  • Do not overload the tool.
  • Do not use the tool if it is damaged.
  • Disconnect the tool from the power source before making any repairs.
  • Store the tool in a safe place when not in use.

Before Use

  • Make sure the tool is properly assembled.
  • Inspect the tool for any damage before use.
  • Charge the battery fully before using the tool.
  • Insert the bit into the chuck and tighten it securely.

Troubleshooting

  • If the tool does not work, make sure it is properly assembled and that the battery is charged.
  • If the tool still does not work, contact Black & Decker customer service for assistance.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace any worn or damaged parts immediately.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the tool fails within the warranty period, it will be repaired or replaced, at Black & Decker's option, free of charge.

Contact Information

Black & Decker 1901 E. Hillsdale Blvd. Torrance, CA 90503 1-800-544-6986 www.blackanddecker.com

Additional Information

  • The tool can be used with a variety of bits, including Phillips, slotted, and square drive bits.
  • The tool has a variable speed trigger that allows you to control the speed of the tool.
  • The tool has a built-in LED light that illuminates the work area.
  • The tool can be used for a variety of tasks, including driving screws, tightening nuts, and removing screws.

I hope this manual has been helpful. Please contact Black & Decker customer service if you have any further questions.

Comments

Post a Comment

Popular posts from this blog

Unveiling The Rupes Nl 13: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Image
Rupes NL 13 Information The Rupes NL 13 is a professional-grade electric drill that is designed for a variety of applications, including woodworking, metalworking, and automotive repair. It features a powerful 13 amp motor that delivers up to 3,600 RPM, as well as a variable speed trigger that allows for precise control. The drill also has a comfortable grip and a lightweight design, making it easy to use for extended periods of time. Image of Rupes NL 13 drill Specifications
Read more

Weller Tcp-s: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Weller TCP-S Information The Weller TCP-S is a 50W, 24V soldering iron that uses the Magnastat technology to provide a consistent, reliable temperature. The Magnastat system uses a ferromagnetic sensor to detect when the soldering iron reaches its target temperature, and then automatically turns off the power to the heating element. This helps to conserve energy and extend the life of the soldering iron. The TCP-S comes with a PT 7 adapter and a soldering tip (LT M). The PT 7 adapter allows you to use a variety of Weller soldering tips, and the LT M tip is a general-purpose tip that is suitable for most soldering applications. The TCP-S is a well-made soldering iron that is perfect for professional and hobbyist use. It is easy to use and maintain, and it provides a consistent, reliable temperature.
Read more

Chapin 26020: Pros And Cons, Common Issues, And Best Places To Purchase

Chapin 26020 Information The Chapin 26020 SureSpray Deluxe Sprayer is a versatile and durable tool that can be used for a variety of applications, including spraying fertilizer, herbicides, and pesticides. It is ideal for both homeowners and professionals, and it is easy to use and maintain. Introduction The Chapin 26020 SureSpray Deluxe Sprayer features a 2-gallon translucent poly tank with a large funnel-top opening for easy filling and cleaning. The tank also has a pressure relief valve to prevent overpressurization. The sprayer comes with a SureSpray™ Anti-Clog Filter to help prevent clogging, a curved brass wand, and a poly nozzle. It also includes an on-board measuring cup for accurate chemical mixing, a spray shield to protect plants, a reinforced hose, an ergonomic pump handle, and a pressure relief valve.
Read more